RX-5 Enduro Water-Resistant Water Bladder Backpack (5L)

🛡Pick a color for your off-road soul.

Reflective Silver / Fluorescent Yellow

• ✅Keep hydration for rider off the grid, in woods, in sand, on the adventure.
  
• ✅Water bladder compartment, provides water anytime, anyway.
  
• ✅MOLLE webbing integrated with Velcro, either more pocket Velcro patch can be attached.
  
• ✅Plate / tool bag come with the pack.
  

Water bladder compartment

• ✅Can accommodate water bladder up tp 2L, magnetic hose clipper & Bladder Velcro strap are standard.
  
• ✅Lightweight, non-absorbing PVC, and quick-dry mesh material, provides easy cleaning feature.
  
• ✅Shoulder strap pocket provides easy access for small items(water-resistant zip pocket are not water-proof, please put moisture sensitive items in the water-tight auxiliary pouch.)
  
• ✅Compress strap with buckles stabilize the auxiliary pouch.
  
• ✅Supported by MOLLE system, the auxiliary pouch can be adjust as needed.
  
• ✅Velcro area on the rear side for patches.
  

👑Water-tight Auxiliary Pouch

Removable, install anytime needed, remove when feel like going light.

Disclaimer:

• Be advised that the product is “Water Resistant”, instead of “Water-Proof” (Not suitable for long time immersion in water). The durability of sealing is related to personal condition, RXR will not be liable for damage, stain, or loss of personal items under personal use.
  
• Please note if there is any water remain at the opening, remove water before opening to prevent water from entering. RXR will not be liable for damage, stain, or loss of personal items under personal use.
  
• Pocket on the top cover is not water-resistant (water-resistant zip). Please put important items inside “main space”, RXR will not be liable for damage, stain, or loss of personal items under personal use.
  

Product Features & Reminder:

• This product contains fiber material, there can be fiber exposed caused by manufacturing, it will not affect its water-resistance. The exposed fiber can be removed by cutting or burning, but do not burn the main body.
  
• To ensure water-resistance, all contact surfaces were treated by high-frequency welding, that may leave creases or roughness, it is completely normal and will not affect water-resistance of the product.
  
• PVC material is not ideal material for printing ink, there can be imperfection of color saturation, or abrasion under normal use, which will not be considered as defect.
  
• PVC material bonded together by high-frequency welding can cracked after long-term exposed to acid or alkaline environment, extreme temperature (EX: sea water, rain water, hot spring, extreme hot or cold water…...etc).
  
• Long-term single point stress (pulling, hanging) on handle, shoulder strap may cause crack of fabric surround buckles.
  
• All products were packed right after manufacturing, there can be smell of plastics or inks. The smell will dissipate after 3~5 days in well-ventilated environment.
  

Product Cleaning & Maintenance:

• Eraser, neutral detergent, lotion, melamine foam can be used to remove light stain.
  
• To remove stubborn stains, apply alcohol with cotton rags. Please avoid printed area.
  
• Hang dry if the product get wet.
  
• Hand wash only, do not tumble dry.