RX-3 BUN Rabbit Rider Water-Resistant Bun Bag (20L)

Multi-Use

Backpack / Crossbody bag / Shoulder bag / Hand bag / Rear seat bag

Multi-Purpose Bag

Commuting / Long travel / River tracing / Hiking / Camping / Sport

Product Feature

• ✅Best choice for travel and commuting.
  
• ✅2 soft pad straps + 6 Double D Rings
  
• ✅Roll down airtight seal, air stays inside, water stays out.
  
• ✅Side retractable drawstring pocket for bottle, comes with flexibility.
  
• ✅Hidden anti-theft pocket with drain at bottom, provides quick draw capability.
  

Water-resistance：IPX-6 Anti-Rain Storm

✓Hold out against high press water jet from any direction.

✓Equals Water jet pressure 100kpa, flow rate 100L/min shooting from 3m away for at least 3 min.

Dimension after roll down seal: Opening Diameter: 22.5cm × Width: 37.5cm × Height: 39cm

Dimensions above were measured with bag opening rolled down 3 times, and the bag was full of air. 

Actual dimension and shape will depend on size and quantity of items inside the bag.

Disclaimer:

• Be advised that the product is “Water Resistant”, instead of “Water-Proof” (Not suitable for long time immersion in water). The durability of sealing is related to personal condition, RXR will not be liable for damage, stain, or loss of personal items under personal use.
  
• Please note if there is any water remain at the opening, remove water before opening to prevent water from entering. RXR will not be liable for damage, stain, or loss of personal items under personal use.
  
• Pocket on the top cover is not water-resistant (water-resistant zip). Please put important items inside “main space”, RXR will not be liable for damage, stain, or loss of personal items under personal use.
  

Product Features & Reminder:

• This product contains fiber material, there can be fiber exposed caused by manufacturing, it will not affect its water-resistance. The exposed fiber can be removed by cutting or burning, but do not burn the main body.
  
• To ensure water-resistance, all contact surfaces were treated by high-frequency welding, that may leave creases or roughness, it is completely normal and will not affect water-resistance of the product.
  
• PVC material is not ideal material for printing ink, there can be imperfection of color saturation, or abrasion under normal use, which will not be considered as defect.
  
• PVC material bonded together by high-frequency welding can cracked after long-term exposed to acid or alkaline environment, extreme temperature (EX: sea water, rain water, hot spring, extreme hot or cold water…...etc).
  
• Long-term single point stress (pulling, hanging) on handle, shoulder strap may cause crack of fabric surround buckles.
  
• All products were packed right after manufacturing, there can be smell of plastics or inks. The smell will dissipate after 3~5 days in well-ventilated environment.
  

Product Cleaning & Maintenance:

• Eraser, neutral detergent, lotion, melamine foam can be used to remove light stain.
  
• To remove stubborn stains, apply alcohol with cotton rags. Please avoid printed area.
  
• Hang dry if the product get wet.
  
• Hand wash only, do not tumble dry.